Welcome to IE-LAB!

Exam Dumps
Search
Generic filters
CISCO
Search
Generic filters
CISCO

CCIE Basic skills Configure LACP to implement ether-trunk in one minute

This time we briefly introduce the configuration of LACP,Basic skills of CCIE necessary for network engineers. In LACP, the establishment of Eth-Trunk and the joining of member interfaces are through auto-negotiation.

Get 100% accurate CCIE/ CCNP/CCNA dumps in IELAB .

Get 100% accurate CCIE/ CCNP/CCNA dumps in IELAB .

Get 100% accurate CCIE/ CCNP/CCNA dumps in IELAB .

The basic configuration of Eth-Trunk is as follows:

Add member interfaces to the aggregation group in the Eth-Trunk interface view

[SW2]interface Eth-Trunk 12 //Enter Eth-Trunk interface view

[SW2-Eth-Trunk12] trunkport Ethernet 0/0/21 to 0/0/22 // Divide interfaces into groups

[SW2-Eth-Trunk12]mode lacp-static //Set lacp mode

[SW2-Eth-Trunk12] load-balance src-dst-mac //Set load sharing mode

[SW2-Eth-Trunk12]least active-linknumber 1 //Configure the lower threshold of the number of link aggregation active interfaces, the default is 1

[SW2-Eth-Trunk12]max active-linknumber 2 //Configure the lower threshold of the number of link aggregation active interfaces, the default is 1

[SW2-Eth-Trunk12]lacp preempt enable // enable preemption function

Add member interfaces to the aggregation group in member interface view

[SW2]interface Ethernet 0/0/21

[SW2-Ethernet0/0/21]eth-trunk 12 //Add member interface to the group

[SW2-Ethernet0/0/21]lacp priority 32768 // Set the lacp priority value, the default is 32768

Get 100% accurate CCIE/ CCNP/CCNA dumps in IELAB .

After adding member interfaces to the Eth-Trunk, you need to pay attention to the following issues:

An Ethernet interface can only be added to one Eth-Trunk interface. If you need to add another Eth-Trunk interface, you must first exit the original Eth-Trunk interface.

When a member interface is added to an Eth-Trunk, the MAC address or ARP address is learned according to the Eth-Trunk instead of the member interface.

When deleting an aggregation group, you must first delete the member interfaces in the aggregation group.

This is an important point you should master to tek CCNA/CCNP/ CCIE exams.



IE-LAB provides valid materials(accurate dumps) to help you pass your CCIE. For the written, we have valid workbooks that cover all real exam questions. You can easily pass the exam, usually 7 days’ preparation in enough. For the Lab exam, we will offer valid workbooks(real exam), rack which is the same as real exam, one to one support, professional tutor and timely update.

This article is exclusively published by James from IELAB.NETWORK and cannot be reproduced without permission.

We have huge promotion going on right now, this is your best chance to get accurate written and lab materials.

Get any two Cisco written dumps for 150USD only.

Deposit 150USD now and enjoy 50% off for CCIE next-level lab.

Get 100% accurate CCIE/ CCNP/CCNA dumps in IELAB .

Please follow us if you like our articles.

visit us: http://ielab.network

Facebook : https://www.facebook.com/ielab.network/

Linkedin: https://www.linkedin.com/company/ielabnetwork/

WhatsApp: +8617782638871

Skype:live:ielab.anna



error: Content is protected !!
× How can I help you?